Clock Radio
KCR40
Issue 1/02
POWER SUPPLY
SETTINGTHETIME
AC power: 230-240Volt, 50Hz
1. Press and hold TIME (6) and press (1)
or (2) to adjust to your desired time.
DC power: 9Volt battery type (not
provided) for clock back-up system only.
2. Release Time (6) to store your settings
in memory.
LISTENINGTOTHE RADIO
1. Switch the function selector to the ON
position (9).
An alkaline type battery is recommended.
For optimum performance, this battery
should be replaced every 6 months
1. Insert the AC power cord (12) into a
convenient AC power outlet. Ensure
the switch on the power outlet is in the
off position, plug in the power cord, and
then switch on at the AC power outlet.
2. Switch to AM or FM position with the
Band selector (10).
3. For a better reception in FM, extend
the antenna (11). For better reception
in AM rotate the unit.
2. Connect the 9V battery inside the
compartment at the bottom of the unit
(13).
4.Adjust the volume (7) to the desired
level.
Back-up system: Ensures that the unit
will continue to operate as normal during
an AC power disruption (in order to
preserve the battery life the display will
not light).All clock settings will be kept in
the memory, however, the clock time may
require adjustment for exact accuracy. If
this battery is not installed, the display will
blink 00:00 to indicate that you have to
reset the time and alarm settings.
5. Select your desired radio station (8).
6.To stop listening switch to OFF (9).
SETTINGTHE ALARM WAKE-UP
MODE
This unit allows you to set two different
wake up times that you can choose to use
independantly or simultaneously.
• AL1 or AL2 or AL1 and 2
• Select (11) to AL1 Position.
Press and hold ALARM (5) and press (1)
or (2) to adjust your desired alarm time,
then release the ALARM (5) to store
your setting in memory.
• Select (11) to AL2 Position.
Press and hold ALARM (5) and and press
(1) or (2) to adjust your desired alarm
time, then release the ALARM (5) to
store your setting in memory.
• To wake up to the radio follow steps 1
to 5 in “Listening to the Radio”, then
select AL1, AL2 or AL1 and 2, (11), then
select the AUTO position (9). The alarm
indicator will alight (14).
CARE AND MAINTENANCE
Use only a clean, dry cloth to clean the
external surfaces of the radio only.
Do not attempt to open the case of the
radio at anytime, there are no customer
serviceable parts inside.
• To wake up to the alarm sound, select
the BUZZER position (9).The alarm
indicator will alight (14).
Have the radio serviced by a qualified
service agent should the unit require
access to internal components.
STOPPINGTHE ALARM
The alarm is programmed to operate for 1 When not in use, pack the radio in its
hour and 59 minutes
original box for best protection and store
in a cool, clean and dry location.
IMPORTANT
1. SNOOZE (3): Press to stop the alarm
temporarily, the alarm will ring again
after 9 minutes.
Do not throw batteries in fire!
This radio is designed for indoor use only.
Do not immerse in water or allow liquids
to come in contact with the radio.
2.ALARM (5):The alarm will stop and will
sound again 24 hours later.
3. OFF (9):Turns off the alarm
permanently, alarm indicator will go off.
SLEEPTO MUSIC
Select AM or FM (10) then press SLEEP
(4), the sound will come on for 59
minutes.To change this sleep time press
and hold SLEEP (4) and use (2) to increase
the time by 1 hour or (1) to decrease the
time by 1 minute intervals.To turn off the
music earlier press SNOOZE (2).
The maximum time setting is 1 hour 59
minutes.
KAMBROOK
12 MONTH WARRANTY
If the product includes one or a number
of accessories only the defective accessory
or product will be replaced.
KAMBROOK warrants the purchaser
against defects in workmanship and
material, for a period of 12 months from
the date of purchase (3 months
commercial use).
In Australia, this KAMBROOK Guarantee
is additional to the conditions and
guarantees which are mandatory as
implied by the Trade Practices Act 1974
and State Territory legislation.
Guarantee and purchase receipt for this
product are to be retained as proof of
purchase and must be presented if making
a claim under the terms of the
For service, spare parts or product
information in Australia, please call
KAMBROOK on the customer Service
Line (free call) 1800 800 634.
KAMBROOK guarantee.
KAMBROOK reserves the right to
replace or repair the appliance within
the warranty period.
For service, spare parts or product
information in New Zealand, please
call KAMBROOK New Zealand, Mono
Place, Ellerslie,Auckland.
Warranty does not apply to any defect,
deterioration, loss or injury or damage
occasioned by, or as a result of the misuse
or abuse, negligent handling or if the product
has not been used in accordance with the
instructions.The guarantee excludes
breakages and consumable.
Phone 0800 253 007, FAX 0800 263 001.
If claiming under this guarantee the product
must be returned to freight prepaid.
This warranty is void if there is evidence
of the product being tampered with by
unauthorised persons.
YOUR PURCHASE RECORD (Please complete)
Attach a copy of purchase
receipt here.
DATE OF PURCHASE___________________________
MODEL NUMBER _____________________________
SERIAL NUMBER (If applicable) ___________________
Please don’t return purchase record
unless you are making a claim
PURCHASED FROM ___________________________
Kambrook 4 Kingston Town Close Oakleigh,Victoria 3166,Australia
Customer Service Line (free call) 1800 800 634 Customer Service Fax 1800 621 337
Kambrook (New Zealand) Mono Place Ellerslie,Auckland, New Zealand
Customer Service Line/Spare Parts 0800 253 007 Customer Service Fax 0800 263 001
Due to continual improvement in design or otherwise, the product you purchase may differ slightly from the one illustrated in this book. Issue 1/02
|